Tungaloy Ceramic Cutting Tools at Interrupted Machining
Abstract
The paper deals with testing of ceramic cutting tools with an interrupted machining. Tests have been performed on fixture – interrupted cut simulator constructed at Department of Machining and Assembly, FME, VŠB-TU Ostrava within the scope of the Czech Science Foundation project. The criterion of tool wear is either destruction of cutting tool or 6000 shocks. Testing cutting tool material used in this research is ceramic cutting tool produced by Tungaloy Company. Tested machined materials are 13MoCrV6 and C45 steels. The cutting speeds (408 and 580 m/min) and cutting feeds (0.15; 0.2; 0.25 and 0.3 mm) are investigated with variable parameters whereas the cutting depth is a constant parameter. The pictures of index-able inserts and graphs of dependence at variable cutting speed and cutting feed are shown as a result of a conducted investigation.Downloads
Published
Issue
Section
License
Engineering review uses the Creative Commons Attribution-NonCommercial-NoDerivatives (CC-BY-NC-ND) 4.0 International License, which governs the use, publishing and distribution of articles by authors, publishers and the wider general public.
The authors are allowed to post a digital file of the published article, or the link to the published article (Enginering Review web page) may be made publicly available on websites or repositories, such as the Author’s personal website, preprint servers, university networks or primary employer’s institutional websites, third party institutional or subject-based repositories, and conference websites that feature presentations by the Author(s) based on the published article, under the condition that the article is posted in its unaltered Engineering Review form, exclusively for non-commercial purposes.
The journal Engineering Review’s publishing procedure is performed in accordance with the publishing ethics statements, defined within the Publishing Ethics Resource Kit. The Ethics statement is available in the document Ethics Policies.
